Low Loss & Phase Stable Cable Assembly

With the long experience as RF cable manufacturer for testing, Psatek supports variety of customer needs from cable selection, designing and small quantity production to mass production for testing or commercial use. If you have any other requirements on cable selection, configuration, design and electrical properties than the list, please contact our sales team for supports (sales@psatek.com), thanks.

    Cable Code
    Operating
    Frequency
    (GHz)
    Nominal
    Imped
    (Ω)
    Outer Diameter
    (in/mm)
    Velocity of Propagation
    (%)
    Screening Effectiveness
    (dB, min)
    Weight
    (g/m)
    Min Bending Radius/
    Single
    (mm)
    Min Bending Radius/
    Repeated
    (mm)
    Temp
    Range
    (℃)
    Recommended
    Connectors
    PA086 DC~40 50 0.086/2.20 81 90 16 8.8 22 -55~+125 1.85mm, 2.4mm, 2.92mm, SMA
    PA120 DC~50 50 0.122/3.10 82 90 29 15 31 -55~+165 2.4mm, 2.92mm, SMA, N
    PA142 DC~40 50 0.142/3.60 82 90 33 15 36 -55~+165 2.4mm, 2.92mm, 3.5mm, SMA, N
    PA160 DC~40 50 0.157/4.00 82 90 40 24 48 -55~+165 2.92mm
    PA190 DC~26.5 50 0.189/4.80 82 90 62 24 48 -55~+165 2.92mm, 3.5mm, SMA, N
    PA200 DC~26.5 50 0.200/5.10 82 90 67 25.5 51 -55~+165 2.92mm, 3.5mm, SMA, N
    PA220 DC~18 50 0.220/5.60 83 90 93 28 56 -55~+165 SMA, N
    PA290 DC~18 50 0.291/7.40 83 90 125 37 74 -55~+165 SMA, N
    PA300 DC~18 50 0.301/7.65 83 90 137 38 76 -55~+165 SMA, N
    PA310 DC~18 50 0.311/7.90 83 90 137 39.5 79 -55~+165 SMA, N
    PA320 DC~18 50 0.319/8.10 83 90 146 40.5 81 -55~+165 SMA, N
    PA330 DC~18 50 0.327/8.30 83 90 162 41 83 -55~+165 SMA, N

    ☞ Consult factory if your connector is not shown ☜





    NOTE: Max frequency is limited by the lowest frequency component (cable or connector) within an assembly configuration.


Wechat

+86 17882494562